Matching Speaker Installation - Mitsubishi PD-4225 Owner's Manual

Matching Speaker Installation

Matching Speaker Installation
1. Remove Speaker Brackets from the bottom of Plasma box.
They are located underneath the styrofoam packaging at
the bottom of the Plasma box.
2. Remove the speakers from the box.
3. Fasten the right Speaker Bracket to the Right Speaker
using the 3 included mounting screws. Repeat this proce-
dure for the Left Speaker.
4. Fasten the Right Speaker Assembly (Speaker & Bracket) to
the Plasma TV using the 3 included mounting screws.
Repeat this procedure for the Left Speaker Assembly
(Speaker & Bracket).
14 Plasma TV
5. Remove Speaker wire from Accessories box. Remove pre-
cut plastic from both ends of the Speaker Wire. This will
expose the copper wire. Twist the copper wire counter
clockwise as shown below.
Repeat this procedure for the other speaker wire.
6. Press the red (+) terminal tab on the back of the Right
Speaker. Insert the red wire into the red (+) terminal.
Release the tab to secure the wire.
7. Press the black (–) terminal tab on the back of the Right
Speaker. Insert the black wire into the black (–) terminal.
Release the tab to secure the wire.
8. Repeat steps 6 & 7 for the Left Speaker.
9. Press the red (+) terminal tab on the back of the TV. Insert
the red wire (coming from the Right Speaker) into the red
(+) terminal. Release the tab to secure the wire.
10.Press the black (–) terminal tab on the back of the TV. Insert
the black wire into the black (–) terminal. Release the tab to
secure the wire.
11. Repeat steps 9 & 10 for the wires coming from the Left
Speaker.