Advertisement
OPERATING INSTRUCTIONS
TURNING ON YOUR CIGAR HUMIDOR
Plug in and switch on the appliance by pressing on the power button for 3
seconds.
When you use the cigar humidor for the first time (or restart the cigar humidor
after having it shut off for a long time), there will be a few degrees variance
between the temperature you have selected and the one indicated on the LED
readout. This is normal and it is due to the length of the activation time. Once
the cigar humidor is running for a few hours everything will stabilize.
IMPORTANT: If the unit is unplugged, power is lost or turned off, wait 3 to 5
minutes before restarting the unit. The cigar humidor will not start if you attempt
to restart before this time delay.
Operating Noises
To reach the desired temperature settings, our cigar humidor, like all cigar
humidors operating with compressors and fans, may produce the following types
of noises. These noises are normal and may occur as follows:
• Gurgling sound - caused by the refrigerant flowing through the appliance's
coils.
• Cracking/popping sounds - resulting from the contraction and expansion of
the refrigerant gas to produce cold.
• Fan operating sound - to circulate the air within the cigar humidor.
9
newair.com
Advertisement
