Table Of Contents Table of contents/ Warning…………………………………………………………...….…2 Precautions …………………………………………………………………………....3 About this user manual / Items included in the delivery ……………………….…..….…4 1. IR-remote control ………………………………………………………………..….……..5 2. LCD monitor mounting ………………………………………………………….…..…..7 3. Monitor controls …………………………………………………………………..…..……9 4. Connections..………………………………………………………………………..…..11 5. Monitor settings via OSD menu ……………………………………………………..….12 5.1 Picture ………………………………………………………………………………..…..12 5.2 Sound ……………………………………………………………………………….……12 5.3 OSD Setup ……………………………………………………………………………..13...
Precautions Safety--------------------------------------- Installation--------------------------------------- Should any liquid or solid object fall into the Do not install the unit in an extremely hot or cabinet, unplug the unit and have it checked humid place or in a place subject to excessive by the qualified personnel before operating it dust or mechanical vibration.
This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired About this user manual This manual aims at assisting the user on how to operate the monitors described in this manual.
1. IR remote control (1). Power: Press this button to turn the monitor on/off. (2). Zoom: Press this button to toggle between the different picture formats: Full/Zoom/Subtitle/Regular/Panorama (3). Mute: Press this button to disable the sound. Press this button again to turn the sound on again. (4).
Page 6
(17). USB/Right/Left/Catalog: 1:Press ”USB” Key into the JPEG Menu. 2:Press ”MENU” Key into the USB Main menu 3:Press “Left” or “Right” key to select the JPEG/MP3/DRIVE function. 4:Press”Up/Down” Key to select play file. 5:Press”Right” Key to into the file...
6:Press”Up/Down” Key to select the play file and press Right key to play. And press ”Menu” to stop play. Then press” Catalog” return the menu. And press “Menu” into the USB Main menu. 7:Press” PC/HD,AV1/AV2;SV to exit the USB function. 2 LCD monitor Mounting Guide Desktop Adjust the viewing angle of LCD to fit most comfortable monitoring status.
C. VESA Bracket LCDI-215HDM LCDI-32HDM 3 Monitor controls LCDI-215HDM...
Page 9
LCDI-215HDM (1). Power Turn the monitor on/off. LED: Green Monitor on LED: Red Standby mode (no input signal) (2./3). Adjust Up / Down ▲/▼ Increase or decrease the values in the OSD menu: Up: Increase the values. Down: Decrease the values.
5. Monitor settings via OSD menu Various monitor settings can be made using the OSD menu (On Screen Display). Press the Menu/OK button to call-up the OSD main menu. Here you can make adjustments to the following items: Picture Sound OSD Setup Advance PC (at PC input signal)
5.3 OSD Setup ▲▼ buttons to select adjusts item, Use the and press source button to confirm. ▲▼ buttons to increase/decrease the values, Then use the or use “source” button to change the values. Press the menu button to return to the previous menu item. Item Description Language...
5.6 PC ▲▼ buttons to select adjusts item, Use the and press source button to confirm. ▲▼ buttons to increase/decrease the values, Then use the or use “source” button to change the values. Press the menu button to return to the previous menu item. Item Description ▲▼...
7. Technical specifications Monitor model LCDI-215HDM LCDI-32HDM System PAL / NTSC LCD panel 21.5“ 31.5“ Visible area (mm) 476.6 x 268.1 698.4 x 392.8 Picture format 16 : 9 Max. resolution 1920 x 1080 Pixel dot pitch (mm) 0.248x0.248 0.36375x 0.37375 Colors 16.7M...
Page 15
2. Adjust the volume to an appropriate setting. level? Only picture 3. Make sure the audio cable has been but no sound 3. Is the audio cable connected to the properly connected to the unit. unit? Please contact Opticom Tech with any questions. 1-800-578-1853...