Network - Samsung PM55H User Manual

Chapter 5. Menu

Network

Network ▼
2nd 3rd
Network Status
Open Network
Settings
Server Network Connect to Server
Settings
MagicInfo Mode
Server Access
FTP Mode
Proxy server
Wi-Fi Direct
Description
You can check the current network and Internet status.
Configure network settings to use various smart hub features such as Internet search, content sharing through a
home network and feature updates.
To run Player connect to a network.
• If the SSL option is enabled, the server is configured to use https and data transfer is encrypted.
• Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to the server using
port number 7001, check with your server administrator to find the correct port number and then change the port
number.)
Select the appropriate MagicInfo Mode
Allow or deny access from MagicInfo server.
Specify the FTP operating mode.
Turn on or off and configure proxy server settings.
Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices
with your product directly without a router.
• To use this function, your mobile device should be supported by the Wi-Fi Direct.
To connect your mobile device with your product using Wi-Fi Direct, follow these steps:
1 Go to Wi-Fi Direct screen. The product starts to search devices.
2 Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device.
‒ PBC (Push Button Configuration): Press the
product automatically acquires all the network setting values it needs and connects to your network.
‒ P IN: Input the displayed PIN on your device.
• If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnected.
depending on the environment where you are using the product.
WPS(PBC) button on your Wi-Fi device within 2 minutes. Your
60