Adjusting The Feet; Electrical Connection; Transportation Of The Dryer; Changing The Illumination Lamp - Blomberg LTK2802W User Manual

Table of Contents

Advertisement

Installation
1
3
A
Hose connection should be made in a safe
manner. Your house will be flooded if the
hose comes out of its housing during water
discharge.
C
Water drain hose should be attached to a
height of maximum 80 cm.
C
Make sure that the water drain hose is not
stepped on and it is not folded between
the drain and the machine.

3.4 Adjusting the feet

In order to ensure that the dryer operates more silently
and vibration-free, it must stand level and balanced on
its feet. Balance the machine by adjusting the feet.
Turn the feet to left or right until the dryer stands level
and firmly.
C
Never unscrew the adjustable feet from
their housings.
Dryer / User Manual
2
4

3.5 Electrical connection

For specific instructions for electrical connection required
during installation (see 1.1.1 Electrical Safety)

3.6 Transportation of the dryer

Unplug the dryer before transporting it.
Drain all water that has remained in the dryer.
If direct water drain connection is made, then remove the
hose connections.
We recommend carrying the dryer in
upright position. If it is not possible to
A
carry the machine in the upright position,
we recommend carrying it by tilting
towards the right side when looked from
the front.

3.7 Changing the illumination lamp

In case an illumination lamp is used in your laundry dryer
To change the Bulb/LED used for illumination of your
tumble dryer, call your Authorised Service.
The lamp(s) used in this appliance is not suitable for
household room illumination. The intended purpose of
this lamp is to assist the user to place laundry in the
tumble dryer in a comfortable way.
EN 15 / 36

Advertisement

Table of Contents
loading

Table of Contents