Advertisement
5.4 ECDC Operation Mode Selection
\N0
Set modem to normal mode
\N1
Set modem to direct mode
\N2
Set modem to MNP reliable mode
\N3
Set to MNP/V.42 auto-eliable mode
\N4
V.42 reliable with phase detection
5.5 MNP Response Code Option
\V0
Connect messages are controlled by the command
settings X, W, and S95.
\V1
Connect message displayed in the single line
format described below subject to the command
settings V (Verbose) and Q(Quiet). In Non-
Verbose mode(V0), single line connect messages
are disabled and a single numeric result code is
generated for CONNECT DTE.
5.6 Data Compression
%C0
Disable data compression
%C1
Enable MNP5 data compression negotiation
%C2
Enable V.42bis data compression
%C3
Enable both V.42bis and MNP5 data compression
(default)
5.7 Automatic Retrain
%E0
Disable auto-retrain
%E1
Enable auto-retrain
%E2
Enable fallback/fall forward
Page: 26
[\N]
[\V]
[%C]
[%E]
Advertisement
