Setting Up The Monitor; Installation - Philips 245S1 User Manual

2. Setting up the monitor

2. Setting up the monitor

2.1 Installation

Package contents
Power
* DVI
*Different according to region
1. Place the monitor face down on a
S Line
245S1
Quick
Start
Register your product and get support at
www.philips.com/welcome
2. Hold the stand with both hands.
Monitor
User's Manual
使用产品前请阅读使用说明
Contents:
User's Manual
保留备用 Drivers
www.philips.com/welcome
This product has been manufactured by and is sold
under the responsibility of Top Victory Investments Ltd.,
and Top Victory Investments Ltd. is the warrantor in
relation to this product. Philips and the Philips Shield
Emblem are registered trademarks of Koninklijke Philips
N.V. and are used under license.
*CD
*DP
*HDMI
5
Install the base
smooth surface. Pay attention not
to scratch or damage the screen.
(1) Gently attach the base to the
stand.
(2) Use your fingers to tighten the
screw located at the bottom of
the base.
(3) Use a screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the stand tightly.
(4) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
4
1
2
3