Table of Contents
Advertisement
PB-760LN
3.
Position throttle cable
along the outside of
elbow. Loosen knob
(H) on handle (E).
Align notches in
handle with tabs (F)
and install onto swivel
pipe (C) past long
ridges in pipe.
4.
Insert anti-static wire
through swivel pipe
5.
Assemble swivel pipe into flexible pipe and tighten clamp (A).
6.
Clip throttle cable into throttle cable guide loop (G).
7.
Move handle (E) to desired
position. Tighten knob (H) hand
tight.
8.
Assemble straight pipe (J) onto
swivel pipe (C), until you feel light
resistance. Do not force
connection. Hold swivel pipe and
turn straight pipe clockwise,
engaging positive locking
channels, until connection is firm.
Do not force connection.
9.
Assemble straight pipe with decal (K) to straight pipe as in step 9.
Note: Blower use will eventually loosen pipe connections. Exclusive
positive locking system allows pipes to be tightened. If
loosening occurs, remove two straight pipes and install
according to instructions 9 &10.
X7531125905
© 10/19 ECHO Incorporated
D
G
C
ASSEMBLY
E
B
H
A
C
E
H
J
F
K
21
Advertisement
Table of Contents
