Drive Specifications; Specification Summary Tables - Seagate Ironwolf 512E Product Manual

2.0

Drive specifications

Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the
phrases the drive and this drive are used throughout this manual to indicate the following drive models:
5xxE models
Standard
ST8000VN004
2.1

Specification summary tables

The specifications listed in the following tables are for quick reference. For details on specification measurement or definition, see the
appropriate section of this manual.
Table 1 Drive specifications summary
Drive specification
Formatted (512 bytes/sector)
Guaranteed sectors
Heads
Discs
Bytes per logical sector
Bytes per physical sector
Recording density, KBPI (Kb/in max)
Track density, KTPI (ktracks/in, 0 skew)
2
Areal density, (Gb/in , @ 0 skew mid-disk)
Spindle speed (RPM)
Internal data transfer rate (Mb/s max)
Sustained data transfer rate OD (MiB/s max)
I/O data-transfer rate (MB/s max)
ATA data-transfer modes supported
Cache buffer
Weight: (maximum)
Average latency
Power-on to ready (sec) (typ/max)
Standby to ready (sec) (typ/max)
Startup current (typical) 12V (peak)
Voltage tolerance (including noise)
Non-Operating temperature
*
Operating temperature
Temperature gradient (°C per hour max)
*
Relative humidity
Relative humidity gradient
Altitude, operating
Seagate IronWolf SATA Product Manual, Rev. C
#
ST8000VN004
(see Section
4096
2509
7200
2850
200 (210 MB/s max)
PIO modes 0–4
Multiword DMA modes 0–2
Ultra DMA modes 0–6
256MB (262,144KB)
716g (1.579 lb)
4.16ms
23/30
23/30
1.8A
5V +10/-5%
12V ±10%
–40° to 70°C (Ambient Temperature, see sections
5°C to 70°C (Drive Reported Temperature)
20°C (operating)
30°C (nonoperating)
5% to 95% (operating)
5% to 95% (nonoperating)
30% per hour max
–304.8 m to 3,048 m
(–1000 ft to 10,000+ ft)
8TB
2.2)
10
5
512
371
930
600
2.6.1 and 2.11)
6