Page 1
Company reserve the right to vary specifications from time to time without notice. USTOMER ELPLINE Should you need any advice on the use of your new Consort product, please contact our Helpline: Consort Equipment Products Limited Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT Tel: 01646 692172 Fax: 01646 695195 Email: technical@consortepl.com Web: www.consortepl.com...
Page 2
1. Getting to know your SL wireless controller The SLPBWP controller can control multiple heaters within its RF range. The RF range can be extended if necessary, see product code SLEXT. The SLPBWP is rated IP65 making suitable for outdoor use. The controller has 3 operating modes.
Page 3
7. Choosing a position in a room The SLPBWP controller should be fixed to the wall. Avoid areas with draught or direct sun. Do not position the controller above or close to the heaters or other heat sources. Avoid installing the controller in areas where there are metal objects between the heater and the controller.
Page 4
9. Installation The controller can be powered by either mains 240VAC 50Hz or 12VDC. The power consumption is less than 1W. Do not connect mains voltage to 12V terminals, this will damage the controller. The maximum size wire that can be used is 1mm .
Need help?
Do you have a question about the SLPBWP and is the answer not in the manual?
Questions and answers