Table of Contents
Advertisement
Quick Links
Temperature
adjustment buttons
All electrical appliances produced by the Company are guaranteed for one year against faulty materials or
workmanship. This applies only if the appliance has been used for purposes in accordance with the instructions
provided and has not been connected to an unsuitable electricity supply, or subject to misuse, neglect, damage
or modified or repaired by any person not authorised by us. This guarantee is offered to you as an extra benefit and
does not affect your legal rights.
The correct electricity supply voltage is shown on the rating label attached to the appliance.
Reasonable care has been taken to ensure that this guide is accurate at the time of printing. In the interest of
progress the Company reserve the right to vary specifications from time to time without notice.
C
H
USTOMER
ELPLINE
Should you need any advice on the use of your new Consort product, please contact our Helpline:
Tel: 01646 692172 Fax: 01646 695195 Email: technical@consortepl.com Web: www.consortepl.com
SLVT C
Installation & Control Guide for SLVT
Wireless Controller
Consort Equipment Products Limited
Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT
Operation hours: Mon to Thu 8.30am to 4.30pm | Fri 8.30am to 3.30pm
BS EN ISO 9001 Registered Company No FM12671
ONTROLLER
3
VER
display screen
ON button
1
13984072 Iss 03
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Consort SLVT
Summary of Contents for Consort SLVT
- Page 1 Company reserve the right to vary specifications from time to time without notice. USTOMER ELPLINE Should you need any advice on the use of your new Consort product, please contact our Helpline: Consort Equipment Products Limited Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT Tel: 01646 692172 Fax: 01646 695195 Email: technical@consortepl.com Web: www.consortepl.com...
- Page 2 1. Getting to know your SLVT wireless controller The SLVT controller can control an unlimited number of heaters. The controller has 2 operating modes. It has to be set to the required mode prior to the installation by using the switches located at the back of the controller.
- Page 3 3. Temperature Control Mode Temperature control for Comfort period Prior to installation the maximum comfort temperature must be set by using the knob marked COMF located at the back of the controller as shown below. The range is 15 C to 35 C. The maximum comfort temperature limits the room temperature that can be set by users after installation.
- Page 4 6. Choosing a position in a room The SLVT controller should be fixed to the wall. Avoid areas with draught or direct sun. Do not position the controller above or close to the heaters or other heat sources. Damp areas or areas where SLVT can be mechanically damaged should also be avoided.
Need help?
Do you have a question about the SLVT and is the answer not in the manual?
Questions and answers