Page 1
2021/03/06 00:29 How to configure Secure Tamper Table of Contents How to configure Secure Tamper ....................How to configure .......................... Case 1: ............................. Case 2: ............................. - https://kb.supremainc.com/knowledge/...
Page 2
2021/03/06 00:29 How to configure Secure Tamper How to configure Secure Tamper If the device is separated from the bracket (Tamper On event happens), the information on all users, logs, encryption key and SSL certificates configured in the device will be deleted promptly.
Page 3
Case 1: If you do not set Secure communication with device to Not Use in Setting > SERVER, you should follow below instructions to configure secure tamper. 1. Go to Device Setting > Advanced. 2. Change Secure Tamper into On.
Page 4
If you change Server & device encryption key manual management into Use, you can see below warning message. Please note that, if you configure this setting, the function Secure Tamper will be applied automatically. Before you apply this setting, please be careful.
Page 5
2021/03/06 00:29 How to configure Secure Tamper From: https://kb.supremainc.com/knowledge/ Permanent link: https://kb.supremainc.com/knowledge/doku.php?id=en:how_to_configure_secure_tamper Last update: 2018/04/03 10:11 - https://kb.supremainc.com/knowledge/...
Need help?
Do you have a question about the Secure Tamper and is the answer not in the manual?
Questions and answers