Changing A Wheel - Mercedes-Benz E-Class Wagon Operator's Manual

Maximum load on one tire: e: maximum load on one Maximum load on one tir
tire. This is calculated by dividing the maximum
axle load of one axle by two.
PSI (pounds per squar PSI (pounds per sq uare inc e inch): h): standard unit of
measurement for tire pressure.
Aspect r Aspect ratio: atio: ratio between tire height and tire
width in percent.
T T ir ire pr e pressur essure: e: pressure inside the tire applying an
outward force to every square inch of the tire. The
tire pressure is speci ed in pounds per square
inch (psi), in kilopascals (kPa) or in bar. The tire
pressure should only be corrected when the tires
are cold.
Cold tire pr Cold tir e pressur essure: e: the tires are cold when the
vehicle has been parked for at least 3 hours with-
out direct sunlight on the tires or the vehicle has
been driven for less than 1 mile (1.6 km).
T T ir ire cont e contact surf act surface: ace: the part of the tire that
comes into contact with the road.
T T ir ire bead: e bead: the purpose of the tire bead is to
ensure that the tire sits securely on the wheel rim.
There are several wire cores in the tire bead to
prevent the tire from changing length on the
wheel rim.
Side wall: Side w all: the part of the tire between the tread
and the tire bead.
W W eight of op eight of optional eq tional equipment: uipment: the combined
weight of the optional equipment weighing more
than the replaced standard parts and more than
5 lbs (2.3 kg). This optional equipment, such as
high-performance brakes, level control system, a
roof luggage rack or high-performance batteries,
is not included in the curb weight and the weight
of the accessories.
TIN (Tir ire e Identi cation TIN (T Identi cation Number): Number): a unique identi -
cation number which can be used by a tire manu-
facturer to identify tires, for example, in a product
recall, and thus identify the purchasers. The TIN is
made up of the manufacturer's identity code, tire
size, tire type code and the manufacturing date.
Load-bear Load-bearing inde ing index: x: the load-bearing index is a
code that contains the maximum load-bearing
capacity of a tire.
Tr Traction: action: traction is the grip resulting from friction
between the tires and the road surface.
W W ear indicat ear indicator: or: narrow bars (tread wear bars) that
are distributed over the tire contact surface. If the
Wheels and tires 343
tire tread is level with the bars, the wear limit of
1/16 in (1.6 mm) has been reached.
Distr tribution of v Dis ibution of vehicle occupants: ehicle occupants: distribution of
vehicle occupants over designated seat positions
in a vehicle.
Maximum per Maximum permissible pay missible payload w load weight: eight: nominal
load and luggage load plus 150 lb (68 kg) multi-
plied by the number of seats in the vehicle.

Changing a wheel

Changing a wheel
N N o o t t es on selecting, inst es on selecting, installing and r alling and replacing tir eplacing tires es
* N N O O TE TE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognize
dangers.
& W W ARNING
ARNING Risk of accident due to incor-
rect wheel and tire dimensions
If wheels and tires of the wrong size are instal-
led, the service brakes or components in the
343