206
Setup and Upgrade
Set User Password
The password set by the Set User Password process is lower than that set by the [Set Supervisor
Password] process, and so the user can use the [Set User Password] only after setting a password in
the [Set Supervisor Password] menu.
1
After opening the system setup screen, use the arrow keys to move to [Security].
2
When the Security item appears, select [Set User Password] and press the [Enter] key.
3
When the Create New Password screen appears, enter a password and press the [Enter] key. The
password should not exceed 20 characters and should consist of English letters (A - Z), numbers
(0 - 9), and special characters or a combination of them.