Emc38-12 Features; Emc38-12 Specifications - Cabletron Systems EMC38-12 User Manual

1.4 EMC38-12 FEATURES

Automatic Transmit Port Disable
The EMC38-12 automatically disables the Transmit port when its
corresponding Receive port does not have a link.
Full Duplex Ethernet Support
All of the EMC38-12 ports support Full Duplex Ethernet provided that
the device at the other end of the port supports Full Duplex Ethernet also.
Full Duplex Ethernet allows the EMC38-12 to transmit and receive
signals simultaneously for a 20 Megabit bandwidth through-put.
LANVIEW Diagnostic LEDs
Cabletron equips the EMC38-12 with a visual diagnostic and monitoring
system called LANVIEW. LANVIEW LEDs help you quickly identify
Power and Link status.
Connectivity
The rear panel of the EMC38-12 has a 50-pin Champ connector (RJ-71)
that supports twelve twisted pair segments. The front panel has twelve
10Base-FL multimode ST ports. Each multimode ST port has a Receive
connector and a Transmit connector.

1.5 EMC38-12 SPECIFICATIONS

This section describes operating specifications for the EMC38-12.
Cabletron Systems reserves the right to change these specifications at any
time without notice.
Physical Specifications
Dimensions:
Weight:
Power Requirements
Input:
EMC38-12 USER'S GUIDE
17" L x 9.4" W x 1.7" H
4 lbs.
100 to 125 Volts AC, 1.0A
200 to 240 Volts AC, 0.5A
50 to 60 Hz
EMC38-12 FEATURES
Page 1-3