Static Routing - Edimax BR6216MG User Manual

2.6.6 Static Routing

This router provides Static Routing function when NAT is disabled. With Static Routing,
the router can forward packets according to your routing rules. The IP sharing function
will not work any more in Static Routing mode.
Note: The DMZ function of firewall will not work if static routing is enabled.
Parameter
Enable Static Routing
Destination LAN IP
Subnet Mask
Default Gateway
Description
Static Routing function is default disabled. You
have to enable the Static Routing function before
your routing rules take effect.
The network address of destination LAN.
The subnet mask of destination LAN.
The next stop gateway of the path toward the
destination LAN. This is the IP of the neighbor
router that this router should communicate with on
the path to the destination LAN.
70