Semi-Automatic Zero (Weight Zero-Setting For Small Variations) - LCD C-DESK-BR User Manual

While the net weight is displayed, keep
the key is released the net weight will be displayed again.
- IF A SEMI-AUTOMATIC TARE (NET) IS ENTERED, IT IS NOT POSSIBLE TO
ACCESS THE ENTER PRESET TARE FUNCTION.
- IF A PRESET TARE IS ENTERED, IT'S STILL POSSIBLE TO ACCESS THE SEMI-
AUTOMATIC TARE (NET) FUNCTION. THE TWO DIFFERENT TYPES OF TARE ARE
ADDED.
ALL THE SEMI-AUTOMATIC TARE (NET) AND PRESET TARE FUNCTIONS WILL BE
LOST WHEN THE INSTRUMENT IS TURNED OFF.
Function not available if net functions are disabled (see parameter
INFO MENU).

SEMI-AUTOMATIC ZERO (WEIGHT ZERO-SETTING FOR SMALL VARIATIONS)

By closing the SEMI-AUTOMATIC ZERO input, the weight is set to zero; alternatively, by pressing
0
the key for less than 3 seconds, the
pressing ENTER the weight is set to zero. The zero-setting will be lost upon instrument power-off.
This function is only allowed when:
- the weight is stable; otherwise the
- the combined effect of the semi-automatic zero and zero tracking does not exceed 2% of the
maximum capacity, otherwise the alarm
pressed to display the preset tare. When
message is displayed for 3 seconds, by
alarm appears;
appears.
- 18 -
in section