Installation - Hoover C85TCEX-AUS Manual

WARNING Do
product if the lint filter is not in
position or is
could be ignited.
WARNING Where
surface symbol
the temperature rise during
operation of the tumble dryer
may be in excess of 60
degrees C.
Remove the plug from the
electricity supply. Always
remove the plug before
cleaning the appliance.
Do not continue to use this
machine if it appears to be
faulty.
Lint must not be allowed to
collect on the floor around the
outside of the machine.
The final part of a tumble dryer
cycle occurs without heat (cool
down cycle) to ensure that the
items are left at a temperature
that ensures that the items will
not be damaged.
The tumble dryer is not to be
used if industrial chemicals
have been used for cleaning.
WARNING: Never stop a
tumble dryer before the end of
the drying cycle unless all
items are quickly removed and
spread out so that the heat is
dissipated.
Maximum load drying weight :
see energy label.
not use the
damaged; lint
the hot
is located
You will find this symbol
on your appliance. It
indicates surfaces that
become hot when the
appliance is in use, care
is required around these
areas.
This symbol indicates
there is a risk of fire if the
appliance is not used
correctly.
WARNING:
Flammable materials.
Read these warnings
carefully to avoid the
possible danger fire.

Installation

●
Do not use adapters, multiple
connectors and/or extensions.
●
Never install the dryer against
curtains and be sure to prevent
items from falling or collecting
behind the dryer.
●
The appliance must not be
installed behind a lockable
door, a sliding door or a door
with a hinge on the opposite
side to that of the tumble dryer.
4
Risk of fire/