Cancelling A Cooking Cycle; Enquiry Mode - Baumatic BTM31SS Instruction Manual

Cancelling a cooking cycle

o If you wish to cancel a cooking cycle when it is in progress, you
should press the stop/clear button (G).
o The microwave will stop heating immediately, give an audible
signal and the LED display (A) will return to showing the time of
day.
o Use the door button (J) to open the door of the microwave.
o IMPORTANT: The inside of the microwave and the food that
you have been cooking may be extremely hot. So care should be
taken when removing items from the microwave.
o After the food has been removed from the microwave, you
should make sure that the door is closed.

Enquiry mode

o If you have set a delay start, to check what time the microwave
will start cooking at, press the pre-set button (B). The time of
day that the microwave will start cooking at will appear on the
LED display (A) for a few seconds.
o Whilst the microwave is in use, the LED display (A) will
countdown the cooking time that you have set.
o To check the power level that the appliance is cooking at during
microwave mode, press the microwave button (C) and the
power level will appear on the LED display (A) for a few
seconds.
o To check the power level that the appliance is cooking at during
grill/ conv./combi. mode, press the grill/conv./combi. button (D)
and the power level will appear on the LED display (A) for a few
seconds.
o To check the time of day during cooking state, press the clock
button (B) and the time of day will flash on the LED display (A)
for a few seconds.
20