Download Print this page

Retina RET1031 User Manual page 2

Weatherproof day/night ir color camera with sony high resolution ccd sensor & on-screen adjustability

Advertisement

RET1031
Retina Weatherproof Day/Night IR Color Camera
with SONY High Resolution CCD Sensor & On-Screen Adjustability
SPECIFICATIONS
Model
Pick Up Element
Effective Picture Elements (H X V)
Horizontial Resolution
Minimum Illumination
S/N Ratio
Scanning System
Synchronous System
Auto Electronic Shutter
NTSC: 1/60s~1/100,000s, PAL: 1/50s~1/100,000s
Gama Characteristic
IR Distance
IR Status
IR Power ON
Video Output
Auto Gain Control
Power/Current
Lens
Dimension (mm)
Weight (g)
Storage Temperature
Operating Temperature
ON-SCREEN SETTINGS
LENS
SHUTTER
AUTO,1/50,1/250,1/500,1/2000,1/5000,1/10000,1/100000,x2,x4,x8,x16,x32,x64,x128,x256
BRIGHTNESS
AGC
SENSE UP
EXPOSURE
BLC
D-WDR
RETURN
WHITE BAL
DAY/NIGHT
3DNR
CAM TITLE
D-EFFECT
RS485
MOTION
SPECIAL
PRIVACY
SYNC
LANGUAGE
RETURN
SHARPNESS
BLUE
ADJUST
RED
RETURN
RESET
EXIT
USER MANUAL
RET1031
1/3" SONY Super HAD CCD
NTSC: 811(H) X 508(V) PAL: 795(H) X 596(V)
600 TV Lines
0.001 Lux, 0 Lux ( with IR LED ON)
More than 48db
2.1 interface
Internal, Negative sync.
0.45
50 Meters (with ¢ 5 x 65PCS infrared LED)
Under 10 Lux by CDS
CDS Auto Control
1Vpp, 75Ω
Auto
DC12v (+/-10%) 600 mA
2.8-12mm Manual Zoom Lens
310(W) x 200 (H) x 148 (D) mm
1600
-30~+60°C RH 95% MAX
-10~+45°C RH 95% MAX
MANUAL/DC/VIDEO
0-100
LOW/MIDDLE/HIGH/OFF
2x TO 128x
OFF/BLC/HSBLC
OFF/INDOOR/OUTDOOR
ATW/AWB/AWC/MANUAL/INDOOR/OUTDOOR
AUTO/COLOR/BW
ON/OFF
ON/OFF
FREEZE/ON/OFF
MIRROR
D-ZOOM
GAMMA
NEG.IMAGE
RETURN
CAM ID
ID DISPLAY
BAUD RATE
ON/OFF
OFF
AREA SELECT
AREA DISPLAY
LEFT/RIGHT
WIDTH
TOP/BOTTOM
HEIGHT
COLOR
INT
CHINESE/ENGLISH/JAPANESE
0-31
0-100
0-100
FACTORY RESET/RETURN
TROUBLESHOOTING
1.
No picture after providing power.
Possible power supply voltage abnormality. Check for proper power supply voltage and
polarity. Ensure that all the connecting cables and monitors are hooked up properly.
2.
Interference (hum bars) are moving through the picture.
Check the monitor and peripheral equipment used.
3.
The picture background changes color continuously.
The fluorescent light's electromagnetic field can cause color roll. This is a normal
phenomenon. Reduce the number of fluorescent lights, or increase the distance
between the camera and the fluorescent lights.
4.
The picture quality is poor or "fuzzy"
This is usually due to poor quality cables or poor connections. Ensure that all the
connecting cables and monitors are hooked up properly, or switch to higher quality
connecting cables.
LIMITED WARRANTY
This warranty remains in effect for one year from the date of purchase. Except as specified be-
low, this warranty covers all defects in material and workmanship. The following are not covered:
Damaged caused by accident, misuse, abuse, product modification or neglect, damage occurring
during shipment, damage from failure to follow instructions contained in the owner's instruction
booklet, damage resulting from the performance of repairs by someone not authorized by Retina
Security Equipment, or any claims based on misrepresentations by the seller. This warranty does
not cover incidental or consequential damages. It does not cover the cost of removing or reinstall-
ing the unit. This warranty is void if the serial number has been removed or defaced.
This warranty gives you specific legal rights. You may also have other rights which vary from
state to state. Some states do not allow the exclusion or limitations of incidental or consequential
damages or limitation on how long an implied warranty lasts so the above may not apply to you.
HOW TO OBTAIN SERVICE
Please call us at (800) 844-9555 Monday – Friday 8am – 5pm. Central Standard Time.
We may direct you to an authorized dealer/technician or request that you return the prod-
uct for repair. You must present the original bill of sale to establish the date of purchase.
Please do not ship your product to us for repair without prior authorization. You are
responsible for transportation of your product and payment of any shipping charges. If
the repairs are covered under warranty, we will pay the return shipping charges.
NOTE: Do not attempt to disassemble the camera. Doing so may void your warranty.
No user-serviceable parts inside.

Advertisement

loading