Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Amico GoLift Portable450
Summary of Contents for Amico GoLift Portable450
- Page 1 Installation and Operation Instructions Portable 450 Portable 450...
-
Page 2: Table Of Contents
Installing the GoLift Portable450 in the Amico PLP Track 9-10 Installing the Endstop on the Amico Track Labeling the Tracks Using the Reacher Bar Magnetic Connection of the Hand Control to the GoLift Portable450 Operating the GoLift Portable450 Charging the GoLift Portable450 LED and Buzzer Functions Emergency Stop... -
Page 3: Introduction
The GoLift Portable450 weight capacity is 450 lbs. This weight limit must not be exceeded. The Amico GoLift Portable450 is a fixed lift and can be installed in a variety of track profiles (the trolley can be customized to fit these track profiles) and it also works seamlessly with the Amico GoLift Portable450 Pendant (PLP) System. -
Page 4: Symbols Used In This Manual
0.8341” 1.6256” MARKINGS The GoLift Portable450 is designed to comply with the following Standards: CAN/CSA-C22.2 No. 60601-1:08 Medical Electrical Equipment – Part 1: General requirements for Standard(s): 7.315 basic safety and essential performance. ISO10535:2006 Hoists for the transfer of disables persons –... -
Page 5: Safety Instructions
A training program should be established by the facility to familiarize new caregivers with this equipment. • Do not expose the Amico GoLift Portable450 directly to water. Warranty does not cover any misuse or abuse of the Amico GoLift Portable450. -
Page 6: Technical Specifications For Amico Golift Portable450
Technical Specifications for Amico GoLift Portable450 Maximum Lifting Speed: Approvals: No load: 1.7 inches/second CAN/CSA-C22.2 No 60601-1:08 150 lbs/68 kg: 1.3 inches/second CAN/CSA-Z10535.1: 1 5 450 lbs/204 kg: 1.0 inch/second Expected Service Life: 22,500 cycles or 10 years. Unit Weight: 6 lbs It is recommended that the lift be replaced after this time. -
Page 7: Anatomy Of The Golift Portable450
Anatomy of the GoLift Portable450 Lifts up to 450 lbs! Emergency lowering Unit controls Durable all metal gears GoLift Portable450 weighs just 6 lbs Wired hand control Quick magnetic hand control connection Back of the GoLift Portable450 Emergency lowering Emergency stop... -
Page 8: Basics In Transferring A Patient
Attention can be fully focused on the user’s functional level and the caregivers technique. To use the GoLift Portable450 correctly, the patient should only be lifted to the extent that she/he is clear of the surface and should be moved at this height. -
Page 9: Installing The Golift Portable450 In The Amico Plp Track
Basics in Transferring a Patient Lifting to and from lying position in bed: • Bring the GoLift Portable450 over the center of the patient to be lifted. • Place the hooks parallel to the patient’s shoulders. • Turn the patient onto their side. The sling should be placed so that the top of the sling is at the same height as the top of the patient’s head. -
Page 10: Installing The Endstop On The Amico Track
5. Fasten all endstops tightly using an adjustable wrench. NOTE: If you are installing the Amico GoLift Portable450 in an existing track system you must ensure that the max load of the track system is equal or higher than the max load of the Amico GoLift Portable450. -
Page 11: Labeling The Tracks
All of the lifts come with two track maximum capacity labels inside the box. 3.5” Certified Date: XXXX Track Maximum Capacity: Amico Mobility Solutions Corporation 122-B East Beaver Creek Road 1.877.462.6426 Richmond Hill, ON L4B 1G6, Canada info@amico.com Example Track Label Before installing the lift in the track system, verify the maximum capacity of the room and the certifying load test. -
Page 12: Using The Reacher Bar
Magnetic Connection of the Hand Control to the GoLift Portable450 Magnetic hand control for quick attachment to the GoLift Portable450. Do not place the hand control within 6" of a pacemaker. Patients with pacemakers must follow the instructions provided by their physician and pacemaker manufacturer. -
Page 13: Operating The Golift Portable450
The batteries should be charged on a regular basis. It is recommended that the lift be left on charge when not in operation, and at the end of each day. This will maximize the life cycle of the batteries. The GoLift Portable450 may remain connected to the charger indefinitely since the charger has a built-in regulator, eliminating the danger of overcharging. -
Page 14: Led And Buzzer Functions
Please note, that a reset can be done any time maintenance is performed on the lift, not just after the 1000th lift. Emergency Stop The GoLift Portable450 has an Emergency Stop feature that allows the operator to completely shut off the power to the lift in the event of an emergency. This can be completed by pressing down on the “O”... -
Page 15: Emergency Lowering
NOTE: The emergency lowering button does not provide a raising function. The failure of any of the lowering devices should be reported to Amico Mobility. In an event of emergency when normal lowering system of the lift malfunctions and the “emergency lowering”... -
Page 16: Cleaning And Disinfection
Take great care to ensure that no liquids get inside the Amico GoLift Portable450. The lift is not drip proof or water tight. Failure to protect the lift from liquids may result in damage to the lift and may cause personal injury. -
Page 17: Inspection And Maintenance
* In accordance to the ISO 10535 Standard “Hoists for the transfer of disabled persons – Requirements and test methods” an inspection should be performed on the GoLift Portable450 at least once a year. This inspection should be performed by a qualified technician and should include a working load test of one (1) lifting cycle with the maximum load. -
Page 18: Golift Portable450 Accessories
GoLift Portable450 Accessories Slings Material GoBasic Polyester SLG-GO-BASIC-WV-HS-S SLG-GO-BASIC-WV-HS-M SLG-GO-BASIC-WV-HS-L SLG-GO-BASIC-WV-HS-XL With Head Support GoBasic Mesh SLG-GO-BASIC-MSH-HS-S SLG-GO-BASIC-MSH-HS-M SLG-GO-BASIC-MSH-HS-L SLG-GO-BASIC-MSH-HS-XL With Head Support GoBasic Polyester SLG-GO-BASIC-WV-S SLG-GO-BASIC-WV-M SLG-GO-BASIC-WV-L SLG-GO-BASIC-WV-XL No Head Support GoBasic Mesh SLG-GO-BASIC-MSH-S SLG-GO-BASIC-MSH-M SLG-GO-BASIC-MSH-L SLG-GO-BASIC-MSH-XL No Head Support... -
Page 19: Gotrack Systems And Support Structure
BREAK ALL EDGES 0.005 - 0.010 BREAK ALL EDGES 0.005 - 0.010 THIS PRINT IS PROPERTY OF AMICO CLINICAL AND IS LOANED IN CONFIDENCE SUBJECT TO RETURN UPON THIS PRINT IS PROPERTY OF AMICO CLINICAL AND IS LOANED IN CONFIDENCE SUBJECT TO RETURN UPON... - Page 20 180" x 2.63" x 5.75" 57 lbs TRK-TRP-180 4570 mm x 67 mm x 146 mm 25.9 kg 240" x 2.63" x 5.75" 76 lbs TRK-TRP-240 6100 mm x 67 mm x 146 mm 34.5 kg Amico Mobility Solutions Corporation...
-
Page 21: Environmental Conditions
Also, try to keep the lift from staying in rooms with a metallic roof where temperatures may increase the allowable operating temperature. References on the Package +50°C (122°F) 20% - 90% 700hPa - 1060hPa -10°C (14°F) Temperature range Atmospheric Air pressure for transport humidity for transport and storage for transport and storage and storage www.amico.com... -
Page 22: Electro-Magnetic Compliance Data For Golift Portable450
Portable RF communications equipment should be no closer than 30 cm to any part of the Amico GoLift Portable450. Otherwise, degradation of the performance of this equipment could result. - Page 23 Electro-Magnetic Compliance Data for GoLift Portable450 Guidance and Manufacturer’s Declaration - Electromagnetic Emissions The [EQUIPMENT or SYSTEM] is intended for use in the electromagnetic environment specified below. The customer or the user of the [EQUIPMENT or SYSTEM] should assure that it is used in such an environment.
- Page 24 Electro-Magnetic Compliance Data for GoLift Portable450 Guidance and Manufacturer’s Declaration - Electromagnetic Emissions The [EQUIPMENT or SYSTEM] is intended for use in the electromagnetic environment specified below. The customer or the user of the [EQUIPMENT or SYSTEM] should assure that it is used in such an environment.
- Page 25 Disposal • The Amico GoLift Portable450 doesn’t contain any dangerous goods. • The components of the Amico GoLift Portable450 should be properly disposed at the end of its shelf-life. • Make sure that the materials are carefully separated. • The electrical conducting boards should be submitted to an appropriate recycling proceeding.
-
Page 26: Warranty
Amico Mobility Solutions Corporation warrants its lifting equipment and workmanship to be free from defects for a period of three (3) years from the date of installation. This includes tracks, lift motor, carry bar and accessories. The Amico slings have a Amico Mobility Solutions Corporation warrants its lifting equipment and workmanship to be free from defects for a period of warranty of two (2) years. - Page 27 Notes www.amico.com...
- Page 28 Amico Mobility Solutions Corporation | 122-B East Beaver Creek Road, Richmond Hill, ON L4B 1G6, Canada 600 Prime Place, Hauppauge, NY 11788, USA Toll Free Phone: 1.877.462.6426 | Toll Free Fax: 1.866.440.4986 | Tel: 905.764.0800 | Fax: 905.764.0862 AJW Technology Consulting GmbH Königsallee 106...
Need help?
Do you have a question about the GoLift Portable450 and is the answer not in the manual?
Questions and answers