General Assembly - Philips HR7783 User Manual

3 Type the product number "HR7776, HR7778
or HR7783" in the search box.
4 Find or download the information you need
from the searching result.
5 For inspiring recipes, pls visit www.philips.
com/kitchen.
Motor thermal protection (Auto-
stop protection against overload)
Your food processor is designed to be
protected from overheating and over-current
conditions during use.
In case of overload, it will automatically stop to
prevent motor damage.
To reset the appliance, follow the steps below:
1 Turn the knob to OFF position and then
unplug it.
2 Remove some of the ingredients to reduce
the load.
3 Allow the appliance to cool down for
20 minutes.
4 Connect the power plug to the power supply
and reselect the desired speed.
3 Use your food
processor

General Assembly

Before you use or assemble any of the
accessories, make sure that you assemble
according to Fig. 2 to 9.
1 Turn the bowl clockwise until you hear a
click to fix it onto the motor unit.
2 Assemble the accessory or the accessory
equipped with the shaft to the bowl.
3 Put the ingredients in the bowl.
• For the citrus press, press the citrus fruits
on the cone, and go to Step 5.
4 Put the lid on the bowl, and turn the lid
clockwise until you hear a click to fix it. Then
put the pusher into the feeding tube.
• For the discs, put the ingredients into the
feeding tube with the pusher.
5 Connect the power plug to the power
supply.
6 Check the advised ingredient quantity and
setting in Table 10. Turn the knob to the
desired speed setting.
7 After use, turn the knob to OFF, and then
unplug the appliance.
Discs
Before you start, make sure that you pick your
desired disc from following and assemble
according to Fig. 2:
Name
Reversible
shredding
disc
Adjustable
slicing disc
Julienne
disc
(HR7778,
HR7783)
Granulating
disc
(HR7778,
HR7783)
French
fry disc
(HR7778,
HR7783)
Purpose
For shredding
ingredients into
thin or thick flat
pieces with the
reversible sides
For slicing
ingredients to the
slicing thickness
you set
For cutting
ingredients into
thin strips
For granulating
ingredients to
small/fine pieces
For cutting
ingredients into
thick strips.
EN 5