Electromagnetic Fields (Emf); Food Processor; General Assembly - Philips HR7776 User Manual

• Certain ingredients such as carrots may
cause discolorations on the surface of the
parts. This does not have a negative effect
on the parts. The discolorations usually
disappear after some time.
• Noise level: Lc = 86 dB [A]

Electromagnetic fields (EMF)

This Philips appliance complies with all
standards regarding electromagnetic fields
(EMF). If handled properly and according to the
instructions in this user manual, the appliance
is safe to use based on scientific evidence
available today.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
2 Introduction
Congratulations on your purchase and welcome
to Philips! To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.
You can only switch on the appliance after
you correctly assemble the accessories on the
motor unit. Refer to Fig. 2 to 10 for the proper
assembly.
For recipes, go to
www.philips.com/kitchen

3 Food processor

General Assembly

Before you use or assemble any of the
accessories, make sure that you assemble
according to Fig. 2 to 10.
1
Turn the bowl clockwise until you hear a
click to fix it onto the motor unit.
2
Assemble the accessory or the accessory
equipped with the shaft to the bowl.
3
Put the ingredients in the bowl.
• For the citrus press, press the citrus
fruits on the cone, and go to Step 5.
4
Put the lid on the bowl, and turn the lid
clockwise until you hear a click to fix it.
Then put the pusher into the feeding tube.
• For the discs and mini juicer, put the
ingredients into the feeding tube with
the pusher.
5
Connect the power plug to the power
supply.
6
Check the advised ingredient quantity and
setting in Table 1. Turn the knob to the
desired speed setting.
7
After use, turn the knob to OFF, and then
unplug the appliance.
EN
9