ASROCK Z690 PG Riptide Manual page 29

RGB LED Header
(4-pin RGB_LED1)
(see p.1, No. 30)
Addressable LED Headers
(3-pin ADDR_LED1)
(see p.1, No. 29)
(3-pin ADDR_LED2)
(see p.1, No. 8)
(3-pin ADDR_LED3)
(see p.1, No. 7)
This RGB header is used to
1
connect RGB LED extension
+12V G R B
cable which allow users to choose
from various LED lighting
effects.
Caution: Never install the
RGB LED cable in the wrong
orientation; otherwise, the cable
may be damaged.
*Please refer to page 42 for
further instructions on this
header.
These headers are used to connect
1
Addressable LED extension ca-
GND
bles which allow users to choose
DO_ADDR
VOUT
from various LED lighting
effects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 43 for
further instructions on this
header.
Z690 PG Riptide
25