ANXELL ML-450 Installation Instruction

Specifications

Operating Voltage: 12 ~ 24 VDC/AC
Current Draw: 280mA/12VDC; 180mA/24VDC
Locking Mode: Fail-Safe
Operating Temperature: -10°C~+49°C
Humidity: 0~85% non-condensing
Applicable to horizontal and vertical installation
For single/double action swing doors
Latch Throw: 13mm
Endurance Rating: 250,000 cycles (Factory tested)
Static strength: 1,500 lbs
Preload: 500 lbs of pressure strength
ML-450 Series Models
ML-450M: Mortise mount
ML-450MSMB: Surface mount
ML-450MVGL: Surface mount (for frameless glass doors & walls)
Strike Plate Dimensions
KP-ML-400-A KP-ML-400-B

Wiring Diagram

ML-450 Electric Lock
Installation Instruction
KP-ML-400-C KP-ML-450-A
Red: +
12~24VDC/AC
Black: -
Blue: N.O.
Door Status Output:
Green: COM.
1A/125VAC
Yellow: N.C.
Copyright © All Rights Reserved. P-MU-ML-450 Published: 2021.09.10
Mortise Mount Model Dimensions
KP-ML-450-B
Butt Splice (IDC) Connector
Using crimper or pliers and pressing the header
of connector down to even position.
ML-450M
KP-ML-450-C
Unti:mm