Weil-McLain Evergreen Pro 220 User's Information Manual page 11

CONDENSING GAS BOILER
The Evergreen control display
Figure 7
boiler control display USER Menu — (set date and time, reset faults).
Evergreen
TM
BOILER STATUS screen
Figure 8
Evergreen boiler control display LOCKOUT SCREEN — screen turns red when boiler locks out —
TM
highlight and select MANUAL RESET to reset boiler as shown below.
Resetting faults:
1. During a fault, the status will change to LOCKOUT and the
Time & Date line will alternate with the fault name. The line
MANUAL RESET will appear on the Boiler Status screen.
2. Select MANUAL RESET to reset fault condition.
Figure 9
boiler control display Maintenance notice screens.
Evergreen
TM
Part number 550-100-213/1220
—
U ' I
SER S NFORMATION
(continued)
3. The MANUAL RESET screen will indicate whether the fault
was a manual or automatic reset, the fault name, and the time
and date it occurred.
4. Call for service if fault continues.
Manual
Date and time
1. Set month, date, year, hour and minutes.
2. Keeping the date and time current makes
sure the control can record problems
accurately.
11