Submodule Receptacle; Led Displays - Siemens SIMATIC S5 Manual

Hide thumbs Also See for SIMATIC S5:

Table of Contents

Construction of the IP 265 Module

1.1.4

Submodule Receptacle

The submodule with the standard function counter is plugged into the submodule receptacle on the

IP 265.

Warning

The memory submodule can only be plugged in or removed when the module is in the

POWER OFF state.

1.1.5

The frontplate of the IP 265 is equipped with several LEDs:

•

1 red STOP LED

•

1 green RUN LED

•

8 green LEDs for 8 digital 24 V inputs

•

8 green LEDs for 8 digital 24 V outputs

Either the RUN LED or the STOP LED will light up to indicate the operating state of the IP 265.

Faults in the IP 265 are indicated by the STOP LED or by a combination of the RUN and the STOP

LED. Different faults are indicated by different flashing signals. See Appendix A for a summary of all

the possible status displays of the IP 265 in conjunction with the standard function counter.

1-4

Standard Function Counter

EWA 4NEB 812 6131-02a

Table of Contents