Table of Contents
Advertisement
Part 2: Repair Information
How to check the lamp replacement counter
The LAMP REPLACEMENT indicator will illuminate
when the lamp counter reaches 1000 hours. This is to
indicate that lamp replacement is required.
You can check the accumulated illumination time of
the lamp as follows:
1. Press and hold the pointer (
more than 20 seconds to enter the service mode.
2. The lamp replacement counter service menu is
displayed as shown in the figure on the right.
For example, when data value "123" is displayed,
the accumulated illumination time of the lamp is
123 hours. To clear the menu, press the POWER
button.
) on the projector for
Lamp replacement counter data
2-20
Service Mode
Input
Video
Group
No.
Data
10
0
123
Ver.
1
.00
Advertisement
Table of Contents
