Download Print this page

Epson P-2000 Instructions To Perform Firmware Update page 4

Hide thumbs Also See for P-2000:


Step 6
• Once the process is completed you will see the message "Resources
Updated Successfully" and be asked to shutdown and restart the P-
2000 (see below image). Remove the CF or SD card after shutting
• After restarting, you may check the new firmware by going to the
"Settings" screen and looking at the bottom right hand corner. This
should confirm the new firmware version.
Multimedia Storage Viewer P-2000/P-4000 - Instructions to perform Firmware Update
Page 4 of 4



This manual is also suitable for: