Sony VGN-S150 Quick Start Manual page 41

If the Windows operating system still does not start, follow these steps to
initialize the BIOS:
1 If there is a disk in the floppy disk drive, then remove it.
2 Turn off the computer.
3 Remove any peripheral devices connected to the computer.
4 Restart the computer.
5 Press the F2 key when the VAIO logo appears. The BIOS Setup
window appears.
6 Press the Right Arrow key
7 Press the Down Arrow key
message Load default values for all SETUP items. appears.
8 Press the Enter key. The Setup Confirmation window appears.
9 Select Yes, and press Enter.
10 Select Exit (Save Changes), and press Enter. The Setup Confirmation
window appears.
11 Select Yes, and press Enter. The computer restarts.
What do I do if my computer stops responding?
It is best to turn off your computer using the Turn Off Computer option on the
Microsoft® Windows® Start menu, located on the taskbar. Using other methods,
including those listed below, may result in loss of unsaved data.
Click Start on the Windows® taskbar, select Turn Off Computer, and then
click Turn Off.
If your computer does not turn off, press the Ctrl+Alt+Delete keys
simultaneously. When the Windows Task Manager dialog box appears,
click Turn Off from the Shut Down menu.
If your computer still does not turn off, press and hold the power button or
slide and hold the power switch until the computer turns off.
If your computer stops responding while playing a CD or DVD, press the
Ctrl+Alt+Delete keys simultaneously. You can turn off the computer from
the Windows Task Manager.
Troubleshooting
to select the Exit menu.
to select Get Default Values. The
41