Voice Recognition; Using The Voice Recognition - Hyundai SONATA Quick Reference Manual

Voice recognition

With the voice recognition function, you can access various
functions of the infotainment system without manipulating the
screen or buttons. This function prevents driver distraction and
dangerous situations.
Use voice commands to access various functions easily.
A The system can recognize the specifi ed voice commands.
> See "Available voice commands" or the voice recognition help.
A Note the following for accurate delivery of command when
saying it.
- Pronounce a command accurately and naturally like a
conversation.
- Keep the correct posture and say commands toward the
direction of the microphone.
A Voice recognition is automatically ended when:
- You make or receive a call.
- A media source is connected or disconnected.
- The front or rear cameras operate (if equipped).
- The [RADIO] or [MEDIA] button is pressed to perform
another function.
- Rerouting or other unexpected action is made due to
deviation from the route during guidance.
7-2
A Voice recognition may not work properly when:
- The sunroof or windows are open so the wind is strong.
- The fan speed of the air conditioner or heater is high (level
3 or below is recommended).
- The vehicle is passing through a tunnel.
- The vehicle is driving on an unpaved road and its noise and
vibration are loud.
- Noise is loud due to a heavy rain or storm.

Using the voice recognition

1
On the steering wheel, press the Voice
Recognition button.
Voice recognition starts along with voice guidance.
A To skip the voice guidance, press the Voice Recognition
button on the steering wheel.
2
When a beep sound is heard, say a command to
perform (e.g. navigation, music, call).
voice commands" or the voice recognition help.
The recognized command appears in text at the top of the
screen and the corresponding function is performed.
A When an additional command is required to perform, the
commands that can be followed in the next step appear
on the screen. Say a command or press a command.
A When there are several similar commands, say a
command number to perform.
> See "Available