1. Manuals
  2. Brands
  3. VOIspeed Manuals
  4. Telephone
  5. Polycom V6060
  6. Setup

VOIspeed Polycom V6060 Setup

Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

Polycom VOIspeed V-IP6060
-
Connect to the Web Configuration Utility of the phone by browsing its IP address. You can obtain the IP
address by doing the following:
Check the phone's welcome screen after it reboots, the IP address is displayed here.
•
Press the MENU button and navigate to STATUS
•
Scroll down to see the IP address.
Enter the phone's IP address into an internet browser and log in to the web configuration utility by using
-
the default username: Polycom (case sensitive) and default password: 456.
Go to Settings
SIP and enter the following settings:
-

Phone Setup

VOIspeed Ltd. Copyright 2012
PLATFORM
PHONE.
©

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Polycom V6060 and is the answer not in the manual?

Questions and answers

Related Manuals for VOIspeed Polycom V6060

Summary of Contents for VOIspeed Polycom V6060

  • Page 1 Enter the phone’s IP address into an internet browser and log in to the web configuration utility by using the default username: Polycom (case sensitive) and default password: 456. Go to Settings SIP and enter the following settings: VOIspeed Ltd. Copyright 2012 ©...
  • Page 2 PROGRAMMING THE PHONE FOR VOISPEED VERSION 4 Select LINES from the navigation menu at the top of the page and then “Line 1” or “Line 2” (NB: if using the IP client, you can only control Line 1). Enter the phone extension and PBX IP address in the Identification Address field in the following format: extension@PBXIP (e.g 246@192.168.1.65)
  • Page 3 VOIspeed Ltd. Copyright 2012 ©...
  • Page 4 PROGRAMMING THE PHONE FOR VOISPEED VERSION 6 Go to settings lines and under “Line 1” replicate the following settings: Display Name: name and surname of the user or extension number Address: extension@Company_Domain Authentication ID: Username Authentication Password: Password Label: extension number...
  • Page 5 Upgrading the Firmware The oldest firmware version supported by VOIspeed is 4.0.2.11.307 therefore please make sure you are running this version or a later one. 'PlcmSpIp' The default FTP user is In order to update the firmware: - install an FTP server in the local network - make sure the DHCP server can allocate an IP address to the TP server with the possibility to setup option '66' usually referred to as BOOTP on most DHCP servers.
  • Page 6 (enter both username and password = Go to share folders select the folder where the new firmware is stored as ‘home directory’ (if not press ‘Set home directory’ a capital H will be display on the left). Enable all permissions: VOIspeed Ltd. Copyright 2012 ©...

Table of Contents