Clas Ohlson 7015M Quick Start Manual

Handlebar Mount
for iPhone/Galaxy
Art.no 38-5907 Model 7015M
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for
any errors in text or images and any necessary changes made
to technical data. If you have any questions regarding technical
problems please contact our Customer Services.
Product description
• Durable and splash-proof case for mountain bikes, mopeds,
scooters, etc.
• Allows you full control over your apps and GPS functions.
• Swivel mount enabling either landscape or portrait viewing.
• Comes with handlebar bracket and spacers for adapting
the holder to fit various phone models.
• Fits iPhone 5/5S/5C, 4/4S and Samsung Galaxy S3/S4.
Care and maintenance
Clean the handlebar bracket and phone case using a lightly
moistened cloth. Only use mild cleaning agents, never solvents
or corrosive chemicals.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local council.
Operating instructions
Note:
• The case is splashproof and can be subjected to rain and
snow. It is a good idea to test the case before using it for
the first time. Lay a piece of paper inside the case instead of
a phone and hold the case under a shower. If the paper gets
wet, the case is defective and must be returned to the retailer.
• Do not use the case whilst bathing and do not immerse it in
water or any other liquid.
GREAT BRITAIN • customer service tel: 08545 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
iPhone 4/4S
1. Adhere the 4 spacer pads
to the bottom of the case
as shown.
2. Refer to the markings on
the bottom of the case to
ensure that you position
the lower support in
the correct position for
iPhone 4/4S.
3. The case has two pins
which fit into the upper
support, make sure that
the notches in the support
line up with the pins.
iPhone 5/5S/5C
1. Adhere the 4 spacer pads
to the bottom of the case
as shown.
2. Refer to the markings on
the bottom of the case to
ensure that you position
the lower support in
the correct position for
iPhone 5/5S/5C.
3. The case has two pins
which fit into the upper
support, make sure that
the notches in the support
line up with the pins.
4. Position the cord so
that it lies in the notch
in the upper support
(see below).
Incorrect positioning of Correct positioning of
the cord the cord
Galaxy S3/S4
Stick the spacer pads on as
shown in the picture. The long
bar pads on the sides of
the case should be placed
below the side buttons on
the phone.