Adjusting Your Monitor Image; Using The Direct Access Controls - Lenovo ThinkVision P24H-2L User Manual

Adjusting your monitor image

Using the direct access controls

This section describes the control features to adjust your monitor image.
The direct access controls can be used when the On Screen Display (OSD) is not
displayed.
Table 2-1. Direct access controls
Icon Control
DDC-CI
1
Exit
Input Change
2
Up
Brightness
3
Down
Menu
4
Enter
Note: The P24h-2L uses Natural Low Blue Light Technology that reduces harmful blue light
to protect human eyes while maintaining picture quality in 6500K color temperature.
If you can't make sure the monitor already under Low Blue Light mode, just do Reset action in
the OSD item Options
Description
Press and hold for 10 seconds to enable or
disable the DDC-CI function
Exit from menu
Switches the video input source
Up browsing key
Direct access to Brightness adjustment
Down browsing key
To access OSD menu
Press to confirm selection
Press and hold for 10 seconds will lock
menu/un-lock menu
Press to enter next level on main menu/sub
menu status or enter previous level on
adjustment bar
Factory Reset.
Chapter 2. 2-3