Cabletron Systems FDDI Repeater User Manual page 15

Switch Function
1 None
2 None
FNB-1
3 External
Ring
FNB-2
4 External
Ring
FNB-1
5
Status
FNB-2
6
Status
Restore
7
Defaults
8 Control
Table 2-1. Function of DIP Switch
Description
Not Used.
Not Used.
Specifies which ring is
externalized for FNB-1.
Specifies which ring is
externalized for FNB-2.
The status of the FNB-1.
The status of the FNB-2.
Restores module to the
original factory settings.
This switch determines
whether the module is
controlled by the DIP
switches or Local
Management.
Setting the Module Card DIP Switch
On Off
N/A N/A
N/A N/A
Primary Secondary
Primary Secondary
Inserted Bypassed
Inserted Bypassed
Toggle N/A
Local DIP
Management Switches
Factory
Default
N/A
N/A
Primary
Primary
Inserted
Inserted
N/A
Local
Management
2-5