LK Systems i-press mini MAP2L19LK Instruction Manual page 17

Instruction Manual Pressing Tool
MAP2L19LK
2. Warranty
If the tool is operated according to its intended use and the regular maintenance services are observed our war-
ranty is 24 months from the time of delivery. Worn-out parts resulting from their intended use are excluded. We
reserve the right to rework the tool in case of a justifi ed warranty claim.
3. Description of the battery operated electro-hydraulic pressing tool
3.1 Description of the components
The hydraulic tool is a hand guided tool and consists of the following components:
Table 2 (see page I, pic.1)
Pos. Description
1 Pressing head
2 Retract slide
3 LED (red)
4 Battery lock
5 Battery
6 LED (white)
7 Trigger
8
Pressing jaws
9 Locking pin
3.2 Brief description of the important features of the unit
Safety features:
The unit is equipped with a special brake which instantly stops the forward motion of the piston/dies when the trigger
is released.
A white LED illuminates the working space after activating the trigger. It automatically switches off 10 sec. after relea-
sing the trigger. This feature can be deactivated (see page IV),
HE.16074_B © 08/2014
Function
Working unit to accommodate the pressing jaws
Slide to open the pressing jaws in case of an error or emergency
Indicator for battery charge, service Intervals and faults
Slide to unlock the battery
Rechargeable Li-Ion battery 18V
to illuminate the working area
Actuator to start the pressing cycle
dies to press the fi tting on the pipes (will be supplied by the system provider)
Pin with special lock to open/close the pressing head
2
GB