Table of Contents
Advertisement
RTCU LX4 pro Technical Manual V1.00
Advanced Industrial M2M/IoT Gateway
LTE Worldwide Cat. 4 Cellular Engine
The RTCU LX4 pro uses an LTE/UMTS/HSPA engine with the following features:
•
Max. 150Mbps down / 50Mbps upload (Cat 4)
•
LTE-FDD: B1/ B2/ B3/ B4/ B5/ B7/ B8/ B12/ B13/ B18/ B19/ B20/ B25/ B26/ B28.
•
LTE-TDD: B38/ B39/ B40/ B41
•
WCDMA: B1/ B2/ B4/ B5/ B6/ B8/ B19
•
GSM: 850/900/1800/1900 MHz
•
SMS (Text and PDU)
•
UMTS release 7, max. 42Mbps down / 5.76Mbps upload, (Cat 6)
•
Digitized audio / DTMF capability.
The Cellular Engine is designed for Worldwide deployment.
SIM-Card
The RTCU LX4 pro device contains a standard Mini SIM card reader located inside the device. The
SIM card reader is a lid-based reader with a mechanical lock system to secure the SIM card
installation. Please refer to Appendix A for the SIM card installation guide.
If the SIM-card is removed during the cellular operation, the device will be rejected from the network
shortly after.
Antennas
Cellular Antenna
The RTCU LX4 pro device contains an SMA female connector for connecting a suitable LTE compliant
antenna. When installing the antenna, please ensure that the antenna is not in close proximity to
metallic parts or anything else, which can influence the antenna's efficiency.
Please consult the installation guide that follows the antenna.
Wireless M-Bus Antenna (optional)
The RTCU LX4 pro device contains an SMB male connector for connecting a suitable Wireless M-Bus
(868 MHz) compliant antenna.
Logic IO ApS.
Holmboes Allé 14
8700 Horsens
Denmark
Page 29 of 39
Ph: (+45) 7625 0210
Fax: (+45) 7625 0211
Email: support@logicio.com
www.logicio.com
Advertisement
Table of Contents
