Advertisement
Quick Links
IMPORTANT SAFETY INSTRUCTOPNS
Please read through these instructions completely to be sure you're comfortable with this easy
install process. Also check your TV owner's manual to see if there are any special requirements
for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation,
assembly or use of this product, contact your Customer Service.
CAUTION: Avoid potential personal injuries and property damage!
● This product is designed for use in wood stud, solid concrete, and concrete block walls
- DO NOT install into drywall alone!!
● Make sure that mounting screws are anchored into the center of the stud. Use a stud
finder to locate the edge of the wood stud, then draw stud center line in the middle
point of the edges.
● The wall must be capable of supporting five times the weight of the TV and mount combined.
● Do not use this product for any purpose not explicitly specified by manufacturer.
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
● The temperature at the front of the fireplace mantle must never exceed 45℃（113℉）
TOOLS NEEDED FOR ASSEMBLY
W rench
Pencil
Leve l
Installation Instruction
Above Fireplace Pull Down TV Mount
INTRODUCTION：
Mount your television conveniently
above your fireplace using this Above
Fireplace Mount.
The mount allows you to keep
the TV safely up and out of the way
when not in use, then you can pull
it down to eye level for comfortable
viewing
Screw
Elect ri c
Socket
drive r
D ril l
W rench
Model
Display size
Minimum display weight
Maximum display weight
Minimum VESA size
Maximum VESA size
Swivel range
Tilt range
Rotation range
5.5 mm
(7/32 i n.)
Stud
W ood
Fi nder
Dril l Bi t
43136336
40"-65"
7.5kgs(16.5lbs)
35kgs (78lbs)
200X200mm
600x400mm
+/- 45°
+5°/-15°
+/- 5°
10 mm
(3/8 i n.)
M asonry
H amm er
D ri l l Bi t
Advertisement
Summary of Contents for Doss 43136336
- Page 1 Installation Instruction Above Fireplace Pull Down TV Mount Model 43136336 INTRODUCTION： Mount your television conveniently Display size 40”-65” above your fireplace using this Above Minimum display weight 7.5kgs(16.5lbs) Fireplace Mount. The mount allows you to keep Maximum display weight 35kgs (78lbs)
-
Page 2: Parts For Assembly
PART INCLUDED : This product contains small items that could be a choking hazard if swallowed. WARNING Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. - Page 3 ASSEMBLY STEP 1: Assemble Your Wall Plate Assemble Wall plate onto Wall plate as illustrated. Secure using four screws in the holes shown (Use 6mm hex key ) ( fig 1.1 ) STEP 2.1: Attach Wall Plate to Wall ( Wood Stud Option ) CAUTION: Avoid potential personal injuries and property damage! ●...
- Page 4 CAUTION: DO NOT install into drywall alone 75mm(3 in) 5.5mm (7/32 in) CAUTION: Avoid potential personal injury or property damage! All lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate is securely fastened to the wall before continuing on to the next step 3. IMPORTANT: Be sure to drill into the center of the stud.
- Page 5 3. Insert four anchors , Be sure the anchors are seated flush with the concrete surface.(fig 3.3) 4. Install wall plate assembly using four lag bolts and four washers . Tighten the lag bolts only until they are pulled firmly against the wall plate assembly. but do not over tighten. Over tightening can damage the screw , reducing it's holding power.
- Page 6 4.Place a towel or blanket on a flat surface, then place your television face down on it Using the two screws , attach the connecting rod to the bracket . Then, using the four screws attach the handle to the connecting rod .
- Page 7 part A STEP 6: Hang TV onto Bracket Part A Two people lift the TV and hang the bracket on the front panel . Then use a Philips screwdriver to tighten the two locking screws, which secures the bracket to the front panel (fig 7.1) HEAVY! You may need assistance with this step.
- Page 8 knob +/- 5° 180mm 550mm +/- 45° +/- 18° +5° -15°...