Stopping The Engine - ABB HT575675 Operation Manual

4.5
4.5
CAUTION
CAUTION
© Copyright 2016 ABB. All rights reserved.
Operation

Stopping the engine

Stopping the engine
Stopping the engine of oil-cooled turbocharger version
Heat in the turbocharger must be dissipated by the further circulating
lubricating oil.
Post-lubricate for 15 ... 20 minutes.
τ
Maintain oil pressure of 0.5 ... 1.0 bar for post-lubrication.
τ
Stopping the engine of water-cooled turbocharger version
Heat in the turbocharger must be dissipated.
Allow turbocharger cooling water to run for 15 ... 20 minutes after
τ
stopping engine.
Allow oil lubrication to continue running until rotor comes to a stop.
τ
Further post-lubrication is not required and not recommended.
Operation Manual / TPS44-F.. - TPS61-F..
4
4.5 Page 54