Summary of Contents for Campania International FT-132
Page 1
FT-132 Williamsburg Pineapple 2-Tier Fountain Assembly Instructions Fountain Information: • Two people are recommended for the installation of this fountain! • This fountain holds approximately 5 gallons of water. • This fountain uses a large fountain cover: FTNCOV-LG • Compatible with #7 Refill Device and LED kit •...
Page 2
FT-132 Williamsburg Pineapple 2-Tier Fountain Assembly Instructions Two people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-132 Williamsburg Pineapple 2-Tier Fountain Assembly Instructions Step 7 - Place the small pedestal (FT-132C) over the pump cover (FT-132D). Step 8 - Feed the tubing through the hole in the center of the small pedestal (FT-132C). FT-132C (11 lbs) 7"W x 9"H...
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.