Easy@Home DEU004 User Manual page 10

2. Once emptied, gently tap or shake the container to release any excess dust from
the filters.
3. Close the dust container dirt release door.
4. Place bottom of the dust container into the vacuum body. Press firmly until you
hear an audible click.
How to clear a blockage
Low suction or poor pick up may be due to a clog in the vacuum. If you notice a
change in the sound of the motor or a reduction in performance, check for clogs.
CAUTION: Always be sure that the vacuum is switched to OFF and unplugged before
attempting to remove a clog.
1. Empty dust container.
2. Check dust container for buildup.
3. Check both the HEPA and exhaust filters.
4. Remove hose and check for clogs at either end or inside.
5. Check for clog in vacuum head. Turn the vacuum over and rotate the brushes to
identify any obstructions including hair.
6. To clear a blockage in the pet hair and allergen remover, twist the collar and lift
the cover.
How to change the belt or brush
If the vacuum is not picking up efficiently, the belt or brushes or both may need to be
cleaned or replaced. But first, make sure to troubleshoot by emptying the dust
container, cleaning the filters and checking for blockages.
CAUTION: Always be sure that the vacuum is switched to OFF and unplugged before
attempting any maintenance.
1. Turn the vacuum over and remove the 6 screws attaching the guard to the base.
Remove the brush guard, brush and belt and check for wear on the belt and/or
debris on the brush. Loop the belt around the motor and brush channel.
10
User instructions