LG 62SX4D Service Manual page 16

10. POD Certificate Download &
IEEE1394(DTCP) Download
10-1. Preparation for Adjustment
(1) Connect the MEMORY JIG and PC.
(2) Turn on the JIG MAIN POWER SWITCH.
(3) After turning on the PC and MONITOR, execute the
'Certificate Downloader v1.4' from the screen.
10-2. Adjustment Sequence
(1) After opening the 'Certificate Downloader v1.4', enter
Connection set and set the as same below.
The port settings are determined by each PC's setup.
(2) Select 'Connection' and SET connected to RS-232C.
(3) After clicking "Enter", confirm that "Enter Password:"
appears.
(4) Click the "OpenFile - Download" button from CP Data
Download, 'select the Private Key' appears and click
ENTER.
All manuals and user guides at all-guides.com
ADJUSTMENT INSTRUCTIONS
- 16 -
(5) After clicking ENTER, the 'opens Private key' window
appears and select the Private key applied to the SET.
The Private Key file name is on the Label of the Digital
Board.
(6) When the Dialog window appears, click OK and the
write work will begin.
(7) When completed, click 'CP Data Download: OK'
[ When 'CP Data Download: OK' does not appear, certificate
has not Download correctly.
SET is rebooted and certificate Download work must be
repeated.