Auto Setup - Panasonic TX-40AX630B Manual

To rename the channel name (Analogue)
●
1) Press (blue) to edit.
2) Enter characters (maximum 5 characters) with
Numeric buttons, and press
3) Press BACK/RETURN
= Note =
If a VCR is connected only with the RF cable in Analogue, edit VCR.
●

Auto Setup

Automatically retunes the channels received in the area.
This function is available if channel tuning is already performed.
●
Only the selected mode is retuned. All the previous tuning settings are
●
erased.
Child Lock PIN number is required to retune locked channels.
●
Functions > Child Lock > PIN number
If tuning has not been done completely, set
●
Watching > Tuning and editing channels > Manual Tuning
■
DVB-C, DVB-T, Analogue
1. Select Auto Setup
2. Set DVB-C Auto Setup Settings
(DVB-C)
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency in your country.
Normally set Frequency,
●
is not displayed or if necessary, enter each value specified by your
cable provider with
After settings, select
●
OK to set.
to store.
with / and press
with
Symbol Rate
Numeric buttons.
Start scan with
- 78 -
/ /
Manual Tuning.
OK to access.
/ / / and press
and Network ID to Auto. If
/ and press OK
/ or
OK to store.
Auto
to search.