Solt GGSVD7 User Manual page 20

Troubleshooting (Continued)
POSSIBLE FAILURES
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling
out a service technician. Before contacting your local Customer Care team, please check possible cause of
malfunction and solution listed below. Once the problem has been eliminated, press the Start/Pause button to
restart the program. If after all checks, the problem persists, contact your local Customer Care team.
ERROR CODE FAILURE INDICATION
E1 Light dryness level LED will
flash
E2 Light & Standard dryness
level LED will flash
E3 Extra dryness level LED will
flash
ACCESSORIES, PARTS OR FURTHER SUPPORT
Should you need to purchase a replacement lint filter, or any other spare parts, please contact your local Customer
Care team, details of which can be found below.
Online help:
Customer Care:
DESCRIPTION
Dryer temperature inter-
nally is too hot.
Temperature sensor error
Temperature sensor error
support.residentiagroup.com.au
1300 11 4357
ACTION
The dryer may have been over-
loaded, ventilation is blocked or
the lint filter is blocked. Please
switch off the dryer (un-plug),
open the door and ensure the
load is correct. Ensure that the lint
filter is clean. Ensure the dryer can
ventilate correctly.
Try switching the dryer off, unplug
and leave for 15 minutes. Recon-
nect the appliance and see if the
fault is fixed. If not, please contact
your local Customer Care team.
Try switching the dryer off, unplug
and leave for 15 minutes. Recon-
nect the appliance and see if the
fault is fixed. If not, please contact
your local Customer Care team.
20