3. Insert an SSD into the SSD tray and then push back the SSD Tray Arm.
Note: The models support SSD height with 7mm and 9.5mm. If 7mm SSD is in use, it is
strongly recommended to use a spacer to increase the SSD height from 7mm to 9.5mm to
prevent from wobbling and vibration.
4. Lock the SSD Tray using the supplied SSD Lock Key.
eNVP-JNN-IV-D0008 / eNVP-JTX-IV-D0008 / eNVP-JNX-IV-D0008
8