Watching Channels From An External Device; Changing Picture And Sound Settings; Sleep Timer; Switching Audio Mode - Magnavox 55ME345V/F7 A Owner's Manual

Watching channels from an external device

Switching each input mode can easily switch with the remote
control between TV (DTV or analog TV) and external devices when
they are connected to the unit.
1
Turn on the set-top box or the connected device.
The picture from the set-top box or the connected device
●
might appear automatically on the TV screen.
If the picture does not appear
① Press SOURCE repeatedly to select the set-top box or the
connected device and wait a few seconds between each
selection until the picture appears.
Pressing H reverses the direction of the input modes.
●
e.g.)
11.1
Source
TV
DTV / Analog TV
HDMI1
channel
HDMI2
HDMI3
Video
PC
PC
② Use the remote control for the set-top box or the connected
device to select channels to view.

Changing picture and sound settings

1
Press MENU and use H I J K to select Picture > Auto
picture or Sound > Auto sound to set your TV to a predefined
picture and sound setting.
2
Use H I to select one of the following settings :
Auto Auto
picture sound
The customized settings you defined
Personal
using the Picture and Sound menu
Standard
For normal TV viewing
Enhanced picture contrast,
Vivid
sharpness and sound for viewing in a
well-lit room
Brilliant picture settings and clear
Sports
sound for high action
Deep picture and powerful sound
Movie
settings for a cinematic experience
Optimized for PCs and game
Game
–
consoles
Eco TV settings for low power
Eco
–
consumption
Music
– Optimized for music playback
Controls picture tone and sets the
News
– anchor's voice at a comfortable
volume level
HDMI1 HDMI2
Video
or
HDMI3
Component
Description

Sleep timer

Sleep timer can set the unit to go into standby mode after an
incremental period of time.
Press SLEEP repeatedly to change the amount of
time (increases the time by 30 minutes up to 120
minutes).
Press SLEEP once to call up the display for checking the remaining
time.
To cancel sleep timer, press SLEEP Repeatedly until Off is
●
displayed.

Switching audio mode

Digital TV operation
1
Press SAP to display the currently selected language and the
number of available languages.
2
Press SAP repeatedly to cycle through the available audio
languages.
A Day of Memories
Rating information:
US TV : TV-MA US movie
US TV : TV-14 US movie
US TV : TV-PC US movie
US TV : TV-G US movie
Audio information: English
audio
Note(s)
Available languages differ depending on the broadcast.
●
Other is displayed when the audio language cannot be acquired or the acquired
●
languages are other than English, French or Spanish.
Cable / NTSC (Analog) TV operation
1
Press SAP to display the currently selected audio mode.
2
While receiving an MTS broadcast, press SAP
repeatedly to cycle through the available audio
channels.
e.g.) When all audio modes are available
SAP / STEREO
SAP /
Stereo
: Outputs stereo audio
SAP
: Outputs a second audio program
Mono : Outputs mono audio
17
Sleep timer 120min.
KABC
11.1
English
: X 1/2
: NC-17
1080i HD 16:9
: R
: PG-13 Rating CC
SAP / STEREO
SAP / STEREO
MONO
Continued on next page.
.
English
11