Advertisement
Quick Links
READ AND SAVE THESE INSTRUCTIONS
Thank you for purchasing a Gulf Coast Fans Inc. product. It will provide
years of cost efficient comfort. With over a decade of experience in ensuring
quality workmanship at an affordable price, we stand behind our product and
we hope you will too.
Read these instructions carefully before you start.
1
2
Turn off the power at the source before installation, servicing, or cleaning.
3
WARNING--TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS
FAN WITH ANY SOLID STATE SPEED CONTROL DEVICE. USE ONLY GULF COAST
CONTROLS.
4
WARNING--TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE
BLADE IRONS WHEN INSTALLING ON BLADES, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NOT INSERT FOREIGN OBJECTS IN BETWEEN ROTATING
FAN BLADES.
5
WARNING--TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL
INJURY, MOUNT FAN TO AN OUTLET BOX MARKED "ACCEPTABLE FOR FAN
SUPPORT" AND USE THE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX.
6
If you don't feel comfortable hanging and wiring this fan, we recommend that you hire a
qualified electrician to install it.
All wiring and electrical connections must meet the National Electrical Code and any local
7
codes that may apply.
8
After installation, fan blades must be at least seven (7) feet from the floor.
Porch Fan
HC-1131
IMPORTANT PRECAUTIONS
Gulf Coast Fans 2010 - Portions
1993
Page 1
Advertisement
Related Manuals for Gulf Coast Fans HC-1131
Summary of Contents for Gulf Coast Fans HC-1131
- Page 1 Porch Fan HC-1131 Thank you for purchasing a Gulf Coast Fans Inc. product. It will provide years of cost efficient comfort. With over a decade of experience in ensuring quality workmanship at an affordable price, we stand behind our product and we hope you will too.
- Page 2 Make sure all of the screws are tight. At this time you may want to shorten the wires from the fan to about 6" to 8" long. This helps when you tuck the wires into outlet box. Page 2 Gulf Coast Fans 2010 - Portions 1993...
- Page 3 If you have a Gulf Coast Remote Control, fan should be wired according to method A. Method B can be used with two separate controls for the fan and light, or with a combination wall control, such as a 423L Gulf Coast control. Page 3 Gulf Coast Fans 2010 - Portions 1993...
- Page 4 Loose screw at top of fan. Try switching opposing blades. We recommend that you retighten the blade Gulf Coast Fans, Inc. products are sold at iron to blade screws and blade iron to motor Dan's Fan City stores. screws after fan has been up for 30 to 60 days.
Need help?
Do you have a question about the HC-1131 and is the answer not in the manual?
Questions and answers
Does this fan, the Gulf Coast Riviera 8920, Dixie Belle HC-1131 need to be oiled? It is running slowly and makes noise.
The manual for the Porch Fan HC-1131 does not mention the need for oiling. If the fan is running slowly and making noise, check for loose screws, ensure the reverse switch is fully engaged, and verify that no variable speed control (dimmer) is in the fan circuit. Allow 24 hours of running time for the bearings to fully seat.
This answer is automatically generated