Gulf Coast Fans Futura HC-1992-DA Instructions

Download this manual

READ AND SAVE THESE INSTRUCTIONS

Thank you for purchasing a Gulf Coast Fans Inc. product. It will provide

years of cost efficient comfort. With over a decade of experience in ensuring

quality workmanship at an affordable price, we stand behind our product and

we hope you will too.

Read these instructions carefully before you start.

Turn off the power at the source before installation, servicing, or cleaning.

WARNING--TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS

FAN WITH ANY SOLID STATE SPEED CONTROL DEVICE. USE ONLY GULF COAST

CONTROLS.

WARNING--TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE

BLADE IRONS WHEN INSTALLING ON BLADES, BALANCING THE BLADES, OR

CLEANING THE FAN. DO NOT INSERT FOREIGN OBJECTS IN BETWEEN ROTATING

FAN BLADES.

WARNING--TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL

INJURY, MOUNT FAN TO AN OUTLET BOX MARKED "ACCEPTABLE FOR FAN

SUPPORT" AND USE THE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX.

If you don't feel comfortable hanging and wiring this fan, we recommend that you hire a

qualified electrician to install it.

All wiring and electrical connections must meet the National Electrical Code and any local

codes that may apply.

After installation, fan blades must be at least seven (7) feet from the floor.

Futura

HC-1992-DA

IMPORTANT PRECAUTIONS

Gulf Coast Fans 2010 - Portions

1993

Page 1

Do you have a question about the Futura HC-1992-DA and is the answer not in the manual?

Page 1: Important Precautions
Futura HC-1992-DA Thank you for purchasing a Gulf Coast Fans Inc. product. It will provide years of cost efficient comfort. With over a decade of experience in ensuring quality workmanship at an affordable price, we stand behind our product and we hope you will too.
Page 2 Repeat this procedure with the rest of the blades. You will have at least one screw left over, this Fig. 7 is a spare. Be sure all of the screws are tight. Fig. 7 Page 2 Gulf Coast Fans 2010 - Portions 1993...
Page 3 If you have a Gulf Coast Remote Control, fan should be wired according to method A. Method B can be used with two separate controls for the fan and light, or with a combination wall control, such as a 423L Gulf Coast control. Page 3 Gulf Coast Fans 2010 - Portions 1993...
Page 4 Coupler iron to blade screws and blade iron to motor screws after fan has been up for 30 to 60 days. Gulf Coast Fans, Inc. products are sold at Dan's Fan City stores. Our service department is always ready to help.