Page 1
BWM-7/R-2 BELGIAN WAFFLE MAKERS This manual contains importatant information regarding your Adcraft unit. Please read this manual thoroughly prior to equipment set-up, operation and maintenance. Failure to comply with regular maintenance guidelines outlined in this manual may void the warranty.
Page 2
WARNINGS • Do not touch any hot surfaces • Plug only into a 3-hole grounded electrical outlet of the appropriate voltage • Do not immerse unit, cord or plug in liquid at any time • Unplug cord from outlet when not in use and before cleaning •...
MAKING WAFFLES Turn the unit on and pre-heat for 15 minutes with the waffle grids closed. To make waffles follow these instructions: 1. Spray or brush on releasing agent. 2. Lift the top lid, pour in the mix and close. Allow waffle batter to sit for 10 seconds. 3.
Page 4
Wiring Diagram for the Waffle Makers HEATING ELEMENT POWER CORD EARTH LINE Relay TERMINAL PROBE TRANSFORMER HEATING ELEMENT CIRCUIT PANEL POWER SWITCH LN/AC 115V/50~60Hz 1.2kW/10.5A June 2017...
Page 5
Parts Diagram and Replacement Parts for the Single Waffle Maker June 2017...
Page 6
Controlling Board Electrical Parts Base Contactor Terminal Transformer Bottom Board Bracket for rotating Arm Hexagonal Bolt Rubber Ring Back Board Replacement Parts for the Single Waffle Maker Socket Screw Collision Bead Bracket for Collision Bead Spacing Board BWM-7/R - Belgian Waffle Maker 7" Round BWM-7/R - Belgian Waffle Maker 7"...
Page 7
Parts Diagram and Replacement Parts for the Double Waffle Maker June 2017...
Page 8
Spacing board Spacing pin Angle spacing sleeve Replacement Parts for the Double Waffle Maker Bearing bracket Socket screw Cross screw BWM-7/R-2 - Belgian Waffle Maker - Double Round 7” Back board Diagram No. Description Diagram No. Description Upper rotating arm...
Page 9
ACE Equipment One Year Limited Warranty Admiral Craft Equipment Corp. (ACE) warrants its equipment against defects in materials and workmanship, subject to the following conditions: ACE Equipment is warranted for one year, effective from the date of purchase by the original owner. A copy of the original receipt or other proof of purchase is required to obtain warranty coverage.
Need help?
Do you have a question about the BWM-7/R-2 and is the answer not in the manual?
Questions and answers