Kawai Concert Artist CA98 Owner's Manual page 13

a POWER button
This button is used to turn the instrument on/off. Be sure to turn
off the instrument after playing.
* The CA98/CA78 digital piano features a power saving mode that
can turn off the instrument automatically after a specified period
of inactivity. For more information, please refer to the 'Auto Power
Off' setting on page 148.
b MASTER VOLUME slider
This slider controls the master volume level of the instrument's
built-in speakers or headphones, if connected.
* The MASTER VOLUME slider will also affect the volume level of the
LINE OUT connectors.
c TOUCHSCREEN display
The touchscreen display provides useful information such as
the currently selected mode, sound name, settings values, and
the status of various functions. The touchscreen is also used to
interact with the instrument by gently tapping on buttons and
icons that appear, or by swiping left and right, or up and down.
* A protective plastic film is attached to the display during
production. Please remove this film before attempting to play the
instrument.
* The display can be set to turn off automatically after a period of
inactivity. For more information, please refer to the 'Auto Display
Off' setting on page 147.
d USB to DEVICE connector
This port is used to connect a FAT or FAT32 formatted USB
memory device to the instrument in order to load/save recorded
song data, and MP3/WAV/SMF files etc.
e PHONES jacks
These jacks are used to connect stereo headphones to the
CA98/CA78 digital piano. 1/4" and 1/8" connectors are provided
for convenience, and both can be used simultaneously, allowing
two pairs of headphones to be connected at the same time.
f LINE IN STEREO jack
This jack is used to connect the 1/8" stereo output from smart
phones, tablets, computers, or other electronic audio equipment
to the CA98/CA78 digital piano's amplifier and speakers.
The input level can be adjusted by using the LEVEL knob.
g LINE OUT jacks
These jacks are used to connect the stereo output (Left/Right
1/4" phone plug) of the CA98/CA78 digital piano to external
amplifiers, mixers, recording devices, and similar equipment.
h USB to HOST port
This port is used to connect the CA98/CA78 digital piano to a
computer using a USB 'B to A' type cable in order to send and
receive MIDI data.
i MIDI IN / OUT jacks
These jacks are used to connect the CA98/CA78 digital piano
to external MIDI devices such as other musical instruments or a
computer in order to send and receive MIDI data.
* For more information about the instrument's connectors and
jacks, please refer to 'Connecting to Other Devices' on page 154.
13